P.E.I. GROUP
2
Class 2

Ceramic Glazed tile Collection »


Living areas of homes but with the exception of kitchens, entrances and other rooms which may have a high foot traffic.



Instruction and Description

We offer more than one hundred models of ceramic glazed borders, baseboards and floor decoration.

Baseboard is mainly used in wall foot, normal sizes are 600x120, 600x130 and 800x120mm which could be used to match Ceramic Floor Tile 300x300, 400x400, 450x450mm, also suitable for matching Polished Porcelain Tile 600x600 and 800x800mm.

Besides of using as wall foot, it could also be used as floor border or floor decoration line to divide different areas in a big room.

If you are using Polished Porcelain Tile for floor, a baseboard cut from same Polished Porcelain Tile Collection but in dark color will be a best choice. Cut size could be 100x600, 120x600 or 150x600mm from Original Tile Size 600x600mm or 130x800, 150x800mm from Original Tile Size 800x800mm depends on your taste.

If you are using Rustic Stone or Glazed Porcelain Tile for floor, a baseboard cut from same collection of Tile but in darker color will be the best solution. Cut size is in the same suggestion as Polished Porcelain Tile.

Technical Data

Dimensions and surface quality

Test Item Test Method Provisions of Standard Test Result Judgement
Length and width EN ISO10545-2 The deviation, in percent of the
average size for each tile (2 or 4 sides)
from the work size: ±0.5%
+0.10% ~ +0.21% PASS
The deviation, in percent of the
average size for each tile (2 or 4 sides)
from the average size of the 10
test spacimens (20 or 40 sides): ±0.5%
-0.05% ~ +0.05% PASS
Thickness Average size EN ISO10545-2 --- 6.9mm ---
Devintion The deviation, in percent of the
average thickness of each tile
from the work size thickness: ±10%
-0.33% ~ +1.63% PASS
Straightness of sides EN ISO10545-2 The maximum deviation from
straightness,in percent, related to the
corresponding work sizes: ±0.3%
-0.04% ~ +0.02% PASS
Rectangularity EN ISO 10545-2 The maximum deviation from
rectangularity, in percent, related to the
corresponding worksizes: ±0.5%
-0.07% ~ +0.09% PASS
Surface flatness Centre curvature EN ISO10545-2 Centre curvature, related to diagonal
calculated from work size: -0.3% ~ +0.5%
+0.14% ~ +0.12% PASS
Edge curvature Edge cruvature, related to the
corresponding work size: -0.3% ~ +0.5%
+0.02% ~ +0.10% PASS
Warpage Warpage, related to the diagonal
calculated from the work size: ±0.5%
-0.05% ~ +0.07% PASS
Surface quality EN ISO10545-2 A minimum of 95% of the tiles
shall be free from visible defects
that would impair the appearance
of a major area of tiles
PASS PASS

Physical properties

Test Item Test Method Provisions of Standard Test Result Judgement
Water absorption EN ISO10545-3 Average>10%, Individual minimum
value 9%. When the average exceeds 20%,
this shall be indicated by te manufacturer.
Average: 16.8%
Individual minimum: 16.3%
PASS
Breaking strength EN ISO10545-4 Thickness<7.5mm, Not less than 200N 614N PASS
Modulus of rupture EN ISO10545-4 Thickness≤7.5mm; minimum 15 MPa 26.1 MPa PASS
Thermal shock resistance EN ISO10545-9 Test method available Fully resistant PASS
Moisture expension EN ISO10545-10 Test method available <0.01% ---
Crazing resistance EN ISO10545-11 Required Fully resistant PASS
Frost resistance EN ISO10545-12 Required Fully frost resistant PASS

Chemical properties

Test Item Test Method Provisions of Standard Test Result Judgement
Resistance
in Chemicals
Resistance to low
concentrations of
acids and alkalis
EN ISO10545-13 Manufacturer to state classification GLA ---
Resistance to low
household chemicals
and swimming pool salts
EN ISO10545-13 Minimum GB GA PASS
Resistance to staining EN ISO10545-14 Minimum Class 3 Class 5 PASS