Pure color glazed ceramic wall tiles export from China (waterproof)

Introduction

Glazed ceramic wall tile is simply a mixture of clays which have been shaped and fired at high temperatures to form a hard body. It is made up of two parts: the body, which is called the BISCUIT, and the surface, which is called the GLAZE. The ingredients used to make both the bisque and the glaze are all natural materials mined from the earth e.g. quartz, kaolin, fritz, dolomite, cobalt, selenium, and talc.

As the non-porous glaze creates a smooth surface which is virtually stain proof, the tile is in a "fresh" appearance and "easy wipe" surfaces which meets the people requirements of hygiene in choosing Kitchen and Bathroom tile. Due to its' wide range of color choices and easy tiling color combination, it's now also popular for using in Children playing room, dinning room, photo studio, bar etc.

Technical Data

Dimensions and surface quality
Test Item Test Method Provisions of Standard Test Result Judgement
Length and width EN ISO10545-2 The deviation, in percent of the
average size for each tile (2 or 4 sides)
from the work size: ±0.5%
+0.10% ~ +0.21% PASS
The deviation, in percent of the
average size for each tile (2 or 4 sides)
from the average size of the 10
test spacimens (20 or 40 sides): ±0.5%
-0.05% ~ +0.05% PASS
Thickness Average size EN ISO10545-2 --- 6.9mm ---
Devintion The deviation, in percent of the
average thickness of each tile
from the work size thickness: ±10%
-0.33% ~ +1.63% PASS
Straightness of sides EN ISO10545-2 The maximum deviation from
straightness,in percent, related to the
corresponding work sizes: ±0.3%
-0.04% ~ +0.02% PASS
Rectangularity EN ISO 10545-2 The maximum deviation from
rectangularity, in percent, related to the
corresponding worksizes: ±0.5%
-0.07% ~ +0.09% PASS
Surface flatness Centre curvature EN ISO10545-2 Centre curvature, related to diagonal
calculated from work size: -0.3% ~ +0.5%
+0.14% ~ +0.12% PASS
Edge curvature Edge cruvature, related to the
corresponding work size: -0.3% ~ +0.5%
+0.02% ~ +0.10% PASS
Warpage Warpage, related to the diagonal
calculated from the work size: ±0.5%
-0.05% ~ +0.07% PASS
Surface quality EN ISO10545-2 A minimum of 95% of the tiles
shall be free from visible defects
that would impair the appearance
of a major area of tiles
PASS PASS
Physical properties
Test Item Test Method Provisions of Standard Test Result Judgement
Water absorption EN ISO10545-3 Average>10%, Individual minimum
value 9%. When the average exceeds 20%,
this shall be indicated by te manufacturer.
Average: 16.8%
Individual minimum: 16.3%
PASS
Breaking strength EN ISO10545-4 Thickness<7.5mm, Not less than 200N 614N PASS
Modulus of rupture EN ISO10545-4 Thickness≤7.5mm; minimum 15 MPa 26.1 MPa PASS
Thermal shock resistance EN ISO10545-9 Test method available Fully resistant PASS
Moisture expension EN ISO10545-10 Test method available <0.01% ---
Crazing resistance EN ISO10545-11 Required Fully resistant PASS
Frost resistance EN ISO10545-12 Required Fully frost resistant PASS
Chemical properties
Test Item Test Method Provisions of Standard Test Result Judgement
Resistance
in Chemicals
Resistance to low
concentrations of
acids and alkalis
EN ISO10545-13 Manufacturer to state classification GLA ---
Resistance to low
household chemicals
and swimming pool salts
EN ISO10545-13 Minimum GB GA PASS
Resistance to staining EN ISO10545-14 Minimum Class 3 Class 5 PASS

150x150mm200x200mm

Thickness: 5.2 ± 0.2 mm
Packing information
Packing: 44 pieces per carton = 8.8kgs = 1 sqm
Loading without pallet per 20'FCL = 3150ctns = 3150sqms
Minimum order: half 20' FCL per model
eff0
  1. * For any request mention the collection name "Glazed", the reference of the model and the size.
  2. * Tile colors are indicative: the color of product takes the real as standard.
tile classification group 2Group 2. Glazed semi vitrified tiles.
Ceramic tile classification
Wall tiles with Glazed surface, mostly use in bathroom, kitchen room and indoor decoration.